USES:
Prospecting
Geology
Geography
Mining
Pest Control
Forestry
Pollution Sampling
Moisture Probe - Installation
Research & Education
Water Locating
Water Quality
Geotechnical
Scientific
Agriculture
Environmental
Treasure Hunting
Archaeology
Engineering
Mineral Assaying
Ground Water Analysis
Forensic Investigation
Surf Carnivals. |
| |
| |
|
 |
|
 |

|
|
|

Item
Code SA, These were originally designed to sample for minerals in beach sands but now
are used extensively for drilling and sampling in very sandy friable soils. A
75mm diameter sand auger will penetrate 30 cm in about 4 turns, which fills
the auger. In good conditions, one man can drill 10 metres in an hour, two
men can drill 20 metres in two hours and 40 metres takes most of the day. In
South Africa 12 men drilled to a depth of 100 metres in one day, in ideal
conditions.
Options: Sizes; Length; Thread; From thicker steel; Hot
spray-on hardening. Also available made from stainless steel. |
SAND
AUGERS - 2 cutters, 2 slots |
ID CODE |
DESCRIPTION |
KGS |
THREAD |
SA5010C |
50mm x 1.0m steel |
1.8 |
coarse |
SA6210C |
62mm x 1.0m steel |
2.0 |
coarse |
SA7510C |
75mm x 1.0m steel |
2.2 |
coarse |
SA10010C |
100mm x 1.0m steel |
2.3 |
coarse |
Note: 1.5M long also available |

|
|
|
|
|