|
|
CASING
Item
Code CAS, We make casing from lightweight steel, or aluminium with brass threads in
sizes 50mm, 62mm, 75mm and 90mm OD and either 1.0 or 1.5 metre lengths.
Threads are either "fine" parallel pipe thread or
"coarse" square acme threads.
Options: Length; Materials made from; Thread type. |
CASING
- threaded and flush joints |
ID CODE |
DESCRIPTION |
Kgs |
CONNECTION THREAD |
CAS5010(F or C) |
50mm x 1.0M steel |
3.1 |
fine or coarse |
CAS6210(F or C) |
62mm x 1.0M steel |
3.2 |
fine or coarse |
CAS7510(F or C) |
75mm x 1.0M steel |
3.7 |
fine or coarse |
CAS9010(F or C) |
90mm x 1.0M steel |
4.8 |
fine or coarse |
Note: 1.5M long also available 1.5kg
Also available: Aluminium
(brass threads) |
|
CASE CUTTER
Item
Code CASCUT,
Is used to protect the thread, give clearance to the casing and to assist
penetration when the casing is turned. Carbide cutters are available for hard
and abrasive soils.
Options: Size; Thread; Carbide cutters |
CASE
CUTTERS - steel & case hardened |
ID CODE |
DESCRIPTION |
Kgs |
THREAD |
CASCUT50(F,C) |
50mm steel |
0.2 |
fine or coarse |
CASCUT62(F,C) |
62mm steel |
0.3 |
fine or coarse |
CASCUT75(F,C) |
75mm steel |
0.4 |
fine or coarse |
CASCUT90(F,C) |
90mm steel |
0.6 |
fine or coarse |
Also available with carbide tips |
|
CASING COLLAR
Item
Code CASCOL, Is to protect the threads at the top of the casing while working inside and
for attaching casing recovery equipment.
Options; Size; Thread |
CASING
COLLAR - steel with lifting eyes |
ID CODE |
DESCRIPTION |
Kgs |
THREAD |
CASCOL50(F,C) |
50mm steel |
0.2 |
fine or coarse |
CASCOL62(F,C) |
62mm steel |
0.3 |
fine or coarse |
CASCOL75(F,C) |
75mm steel |
0.4 |
fine or coarse |
CASCOL90(F,C) |
90mm steel |
0.6 |
fine or coarse |
|
CASING CLAMP
Item
Code CASCL, Is installed on the upper part of the casing for rotating the casing and as a
platform to apply downward pressure (some operators stand on them or add sand
bags).
Options: Size
STRAP WRENCH
Item
Code STWRENCH, Is used in conjunction with the casing clamp or another strap wrench to
tighten and undo the joints. Pipe wrenches (stilsons) are not recommended
because they damage the thin pipe.
Options: Size |
CASING
CLAMP & STRAP WRENCH |
ID CODE |
DESCRIPTION |
Kgs |
THREAD |
CASCL50 |
50 hardwood clamp |
4.8 |
N/A |
CASCL62 |
62 hardwood clamp |
4.6 |
N/A |
CASCL75 |
75 hardwood & steel clamp |
5.4 |
N/A |
CASCL90 |
90 hardwood & steel clamp |
5.4 |
N/A |
STWRENCH |
Strap wrench |
1.6 |
N/A |
STRAP |
Spare strap |
0.3 |
N/A |
|
SLUDGERS OR BAILERS
Item
Code SLR, The rope type operates by a ball valve in the bottom and has an open top with
a loop to tie the rope to. It is faster to use in clean sand but muddy
material or clay lenses slow the progress greatly.
Options: Size; and length of rope. |
SLUDGER
OR BAILER - rope type, with ball valve |
ID CODE |
DESCRIPTION |
Kgs |
THREAD |
SLR3810 |
38mm x 1.0M steel |
1.6 |
rope type |
SLR5010 |
50mm x 1.0M steel |
2.2 |
rope type |
SLR6210 |
62mm x 1.0M steel |
3.0 |
rope type |
Note: 1.5M long available |
|
SLUDGER OR BAILERS
Item
Code SLWT, Whistle top type, also operates by a ball valve but has a fitting to attach
extention rods in the top which then requires a side opening (that resembles
a train whistle) to empty it. It is superior in muddy materials or clay
lenses because the sludger can be pushed down. Can also be used with rope by
ordering a rope loop.
Options: Size; Rope loop and length of rope. |
SLUDGER
OR BAILER - Whistle top, with ball valve |
ID CODE |
DESCRIPTION |
Kgs |
CONNECTION THREAD |
SLW3810 |
38mm x 1.0M steel |
1.8 |
coarse |
SLW5010 |
50mm x 1.0M steel |
2.5 |
coarse |
SLW6210 |
62mm x 1.0M steel |
3.4 |
coarse |
Note: 1.5M long also available
A threaded rope loop is also available |
|
|
|
Open the
‘More Info’ to view text on Below the Watertable.
The information on this page has also been included in our new website |
